HD11CTRL-V2 HDMI In-Line Control Module
============= System Information Commands
?/HELP Print Help Information
STATUS Print System Status And Port Status
INSTA Print All Input Status
OUTSTA Print All Output Status
CTRLSTA Print All Control Status
============= System Control Commands
KEY ON/OFF Set System Key Control On Or Off
IR ON/OFF Set System IR Control On Or Off
IN FHPD ON/OFF Set Input Force HPD On Or Off
NOSIGDLY x Set No Signal Delay Timeout To xxxxx Second(s)
NOSENSORDLY x Set System Off Time To x Second(s) (Default 600s, Range From 0s To 10800s)
When No Sensor Signal Has Been Detected, The System Will Turn Off After The Set Time
RESET Reset System To Default Setting
(Type ""Yes"" To Confirm, ""No"" To Discard)
TRGON x Set The Trigger Method x To Perform System On
x = 1 - Sensor Only
x = 2 - HDMI Only (5V)(default)
x = 3 - HDMI Only (TMDS)
x = 4 - Sensor Or HDMI (5V)
x = 5 - Sensor Or HDMI (TMDS)
x = 6 - CEC (when CEC On : CECOP_IMAGE_VIEW_ON = 0x04 is received)
TRGOFF x Set The Trigger Method x To Perform System Off
x = 1 - No Sensor Only
x = 2 - No HDMI Only (5V)(Default)
x = 3 - No HDMI Only (TMDS)
x = 4 - No Sensor And HDMI (5V)
x = 5 - No Sensor And HDMI (TMDS)
x = 6 - CEC (When CEC Off : CECOP_STANDBY = 0x36 is Received)
OUT x SCALING ON/OFF Set Output x Scaling On Or Off
x = 00 - All Output
x = 01 - Output 01
EDID x DF y Set Input xx EDID To Default EDID zz (EDID Dip Switch Must Be Swit ched To EDID Software)
x = 00: Select All Input Port
x = 01: Select One Input Port
y = 00: HDMI 1080p@60Hz, Audio 2CH PCM (Default)
01: HDMI 1080p@60Hz, Audio 5.1CH DTS/DOLBY
02: HDMI 1080p@60Hz, Audio 7.1CH DTS/DOLBY/HD
03: HDMI 1080i@60Hz, Audio 2CH PCM
04: HDMI 1080i@60Hz, Audio 5.1CH DTS/DOLBY
05: HDMI 1080i@60Hz, Audio 7.1CH DTS/DOLBY/HD
06: HDMI 1080p@60Hz/3D, Audio 2CH PCM
07: HDMI 1080p@60Hz/3D, Audio 5.1CH DTS/DOLBY
08: HDMI 1080p@60Hz/3D, Audio 7.1CH DTS/DOLBY/HD
09: HDMI 4K@30Hz 4:4:4/4K@60Hz 4:2:0, Audio 2CH PCM
10: HDMI 4K@30Hz 4:4:4/4K@60Hz 4:2:0, Audio 5.1CH DTS/DOLBY
11: HDMI 4K@30Hz 4:4:4/4K@60Hz 4:2:0, Audio 7.1CH DTS/DOLBY/HD
12: HDMI 4K@60Hz 4:2:0, Audio 2CH PCM
13: HDMI 4K@60Hz 4:2:0, Audio 5.1CH DTS/DOLBY
14: HDMI 4K@60Hz 4:2:0, Audio 7.1CH DTS/DOLBY/HD
15: HDMI 4K@60Hz 4:4:4, 8-bit, Audio 2CH PCM
16: HDMI 4K@60Hz 4:4:4, 8-bit, Audio 5.1CH DTS/DOLBY
17: HDMI 4K@60Hz 4:4:4, 8-bit, Audio 7.1CH DTS/DOLBY/HD
18: HDMI 4K@60Hz 4:4:4, HDR 10-bit, Audio 2CH PCM
19: HDMI 4K@60Hz 4:4:4, HDR 10-bit, Audio 5.1CH DTS/DOLBY
20: HDMI 4K@60Hz 4:4:4, HDR 10-bit, Audio 7.1CH DTS/DOLBY/HD
21: HDMI 4K@60Hz 4:4:4, HDR 12-bit, Audio 2CH PCM
22: HDMI 4K@60Hz 4:4:4, HDR 12-bit, Audio 5.1CH DTS/DOLBY
23: HDMI 4K@60Hz 4:4:4, HDR 12-bit, Audio 7.1CH DTS/DOLBY/HD
24: HDMI 4K@60Hz 4:4:4, HDR 10-bit (Inc DV), Audio 2CH PCM
25: HDMI 4K@60Hz 4:4:4, HDR 10-bit (Inc DV), Audio 5.1CH DTS/D OLBY
26: HDMI 4K@60Hz 4:4:4, HDR 10-bit (Inc DV), Audio 7.1CH DTS/D OLBY/HD
27: HDMI 4K@60Hz 4:4:4, HDR 12-bit (Inc DV), Audio 2CH PCM
28: HDMI 4K@60Hz 4:4:4, HDR 12-bit (Inc DV), Audio 5.1CH DTS/D OLBY
29: HDMI 4K@60Hz 4:4:4, HDR 12-bit (Inc DV), Audio 7.1CH DTS/D OLBY/HD
30: DVI 1280x1024@60Hz, Audio None
31: DVI 1920x1080@60Hz, Audio None
32: DVI 1920x1200@60Hz, Audio None
33: HDMI 1920x1200@60Hz, Audio 2CH PCM/6CH PCM
34: User EDID 1
35: User EDID 2
36: EDID Passthrough
EDID x CP y Copy EDID From Output y To Input x
EDIDSAVE x Load The Custom External EDID From USB, Then Save It Into Slot xx
x = 34: User EDID 1
x = 35: User EDID 2
============= Relay Control Commands
RELAY x ENABLE Set Relay x ENABLE
RELAY x DISABLE Set Relay x DISABLE
x = 00: All Relays
x = 01: Relays 1
x = 02: Relays 2
RELAY x MODE y Set Relay x to Mode y
x = 00: All Relays
x = 01: Relays 1
x = 02: Relays 2
y = 01: Disable NO And Enable NC
y = 02: Enable NO And Disable NC
RELAY1 x Set The Relay 1 Time To x (Default 10s, Range From 3s To 180s, 0=F ixed Open, 1=Not Use)
RELAY2 x Set The Relay 2 Time To x (Default 10s, Range From 3s To 180s, 0=F ixed Open, 1=Not Use)
============= IR Control Commands
IRLEARN x Learn IR Command Into Slot x
x = 1 Learn IR Display On
x = 2 Learn IR Display Input Select
x = 3 Learn IR Display Off 1
x = 4 Learn IR Display Off 2
x = 5 Learn IR User Command 1
x = 6 Learn IR User Command 2
x = 7~30 Learn IR Command 7~30
IREDIT x:y EDIT IR Command x
x = 1 IR Display On Command
x = 2 IR Display Input Select Command
x = 3 IR Display Off 1 Command
x = 4 IR Display Off 2 Command
x = 5 IR User Command 1 Command
x = 6 IR User Command 2 Command
x = 7~30 IR Command 7~30 Command
y = New IR Command
IRDEL x Delete IR Command In Slot x
x = 1 Delete IR Display On
x = 2 Delete IR Display Input Select
x = 3 Delete IR Display Off 1
x = 4 Delete IR Display Off 2
x = 5 Delete IR User Command 1
x = 6 Delete IR User Command 2
x = 7~30 Delete IR Command 7~30
IRSEND x Learn IR Command In Slot x
x = 1 Send IR Display On
x = 2 Send IR Display Input Select
x = 3 Send IR Display Off 1
x = 4 Send IR Display Off 2
x = 5 Send IR User Command 1
x = 6 Send IR User Command 2
x = 7~30 Send IR Command 7~30
IRDLY x Set Sending Interval Time To x Second(s) Between IR Commands (Defa ult 3s, Range From 1s To 180s)
IROFFRPT1 x Set x Number Of Times IR Off 1 Command Is Repeated (Default 1 Time , Range 1 To 2 Times)
IROFFRPT2 x Set x Number Of Times IR Off 2 Command Is Repeated (Default 1 Time , Range 1 To 2 Times)
IROFFRPTDLY x Set Sending Interval Time To x Second(s) Between IR Off Commands ( Default 2s, Range From 1s To 180s)
============= Output CEC Control Commands
OUT CECENABLE Enable Output CEC
OUT CECDISABLE Disable Output CEC
AUTOONCECINPUT y Enable CEC Input Select For Auto ON Macro To Input y
OUT CECINPUT y Send Output CEC Input y Command
OUT CECPON Send Output CEC Power On Command
OUT CECPOFF Send Output CEC Power Off Command
OUT CECVOLUP Send Output CEC Vol Up Command
OUT CECVOLDOWN Send Output CEC Vol Down Command
OUT CECMUTE Send Output CEC Mute Command
CECUSERCMD <u8DevID u8Addr u8Opcode pu8Operand[MAX]> Send User CEC Command
u8DevID = 00 Select All CEC Input Port
u8DevID = 01 Output 01
u8DevID = F0 Select All CEC Output Port
u8DevID = F1 Output 01
pu8Operand[MAX] : MAX 0 - 14
CECOFFRPT x Set The x Number Of Times CEC OFF Command Is Repeated (Default 1 Time, Range 1 To 2 Times)
CECONRPT x Set The x Number Of Times CEC ON Command Is Repeated (Default 1 Time, Range 1 To 2 Times)
CECRPTDLY x Set The Sending Interval Time In x Second(s) Between CEC OFF Commands (Default 2s, Range From 1s To 180s)
CECDLY x Set The Sending Interval Time In x Second(s) Between All CEC Commands (Default 3s, Range From 1s To 180s)
CECON:x y z a b Set The CEC Commands After CEC ON Command
x y z a b = 1: Power On Command
2: Volup Command
3: Voldown Command
4: Volmute Command
5: Power Off Command
CECOFF:x y z a b Set The CEC Commands Before CEC OFF Command
x y z a b = 1: Power On Command
2: Volup Command
3: Voldown Command
4: Volmute Command
5: Power Off Command
CECON DISABLE Disable Automatic CEC ON Commands When Detecting Signal
CECOFF DISABLE Disable Automatic CEC OFF Commands When Not Detecting Signal
============= Input CEC Control Commands
IN CECENABLE Enable Input CEC
IN CECDISABLE Disable Input CEC
INCECMENU Send Input CEC Menu
INCECUP Send Input CEC Up
INCECVOLUP Send Input CEC Volume Up
INCECLEFT Send Input CEC Left
INCECENTER Send Input CEC Select
INCECRIGHT Send Input CEC Right
INCECBACK Send Input CEC Back
INCECDOWN Send Input CEC Down
INCECVOLDOWN Send Input CEC Volume Down
INCECON Send Input CEC On
INCECOFF Send Input CEC Off
INCECSTOP Send Input CEC Stop
INCECBWD Send Input CEC Backward
INCECFWD Send Input CEC Next
INCECPAUSE Send Input CEC Pause
INCECREWIND Send Input CEC Rewind
INCECFF Send Input CEC Fast forward
INCECPLAY Send Input CEC Play
INCECEXIT Send Input CEC Exit
============= RS232 Control Commands
RS232BAUD x Set RS232 Baud Rate To x
x = 1 2400, 2 4800, 3 9600, 4 19200, 5 38400, 6 57600 (Default), 7 115200
RS232PARITY x Set RS232 Parity To x
x = 0 None(Default), 1 Odd, 2 Even
RS232ON x:y:z:a Send y Type Of Command a Stored In Slot x Whose Baud Rate Is z
x = 1 Send RS232 Display On
x = 2 Send RS232 Display Input Select
x = 3 Send RS232 User Command 1
x = 4 Send RS232 User Command 2
y = a ASCII, h HEX
z = 1 2400, 2 4800, 3 9600, 4 19200, 5 38400, 6 57600 (Default), 7 115200
a = RS232 Command
RS232ON DISABLE Disable Auto RS232 Commands When Detecting A Signal
RS232OFF y:z:a Set RS232 Off Command a Of y Type Whose Baud Rate Is z
y = a ASCII, h HEX
z = 1 2400, 2 4800, 3 9600, 4 19200, 5 38400, 6 57600 (Default), 7 115200
a = RS232 Command
RS232OFF DISABLE Disable Auto RS232 Commands When Not Detecting A Signal
RS232DLY x Set Sending Interval Time In x Seconds Between RS232 Commands
RS232RPT x Set x Number Of Times RS232 OFF Command Is Repeated
RS232RPTDLY x Set Sending Interval Time In x Second(s) Between RS232 OFF Commands (Default 2s, Range From 1s To 180s)
RS232SEND x:y:z Send z To RS232 Port
x = a ASCII,h HEX
y = 1 2400, 2 4800, 3 9600, 4 19200, 5 38400, 6 57600(Default), 7 115200
z = RS232 Command
============= Macro Control Commands
MACRO x NAME y Set Macro Name
x = 01~10 Macro Number
y = Name
MACRO x TR y Set Macro Detect Signal Trigger Conditions
x = 01~10 Macro Number
y = 00 Not Specified
y = 01 Sensor Only
y = 02 No Sensor Only
y = 03 HDMI Only (5V)
y = 04 No HDMI Only (5V)
y = 05 HDMI Only (TMDS)
y = 06 No HDMI Only (TMDS)
y = 07 Sensor Or HDMI (5V)
y = 08 No Sensor And HDMI (5V)
y = 09 Sensor Or HDMI (TMDS)
y = 10 No Sensor And HDMI (TMDS)
MACRO x TRDLY y Set Macro Trigger Delay
x = 01~10 Macro Number
y = 0~10800 s
MACRO x:y MDLY z Set The Macro Event Interval Delay
x = 01~10 Macro Number
y = 01~10 Macro Event Number
z = 0~180 s
MACRO x:y RPT z Set The Macro Event Repet Time
x = 01~10 Macro Number
y = 01~10 Macro Event Number
z = 0~2 Time(s)
MACRO x:y RPTDLY z Set The Macro Event Repet Delay
x = 01~10 Macro Number
y = 01~10 Macro Event Number
z = 3~180 s
MRS232 x:y:z:a:b:c Set RS23S Macro Events
x = 01~10 Macro Number
y = 01~10 Macro Event Number
z = a ASCII, h HEX
a = 1 2400, 2 4800, 3 9600, 4 19200, 5 38400, 6 57600, 7 115200
b = 0 None, 1 Odd, 2 Even
c = RS232 Command Date