TX-H2X-ADZ
Click the image to magnify
Wyrestorm
Wyrestorm TX-H2X-ADZ
4K HDR 4:4:4 60Hz HDMI input & switched
Call for availability
Retail: $693.00 EA


H2XC Card: HDMI In, HDMI Out

SKU: TX-H2X-ADZ

Offering both an HDMI input & output, the ADZ card provides an 18Gbps link direct to the matrix backplane. Supporting both 2160p 4:4:4 8-bit & HDR content and multi-channel audio formats up to Dolby Atmos™, it offers the ability to use native HDMI connectivity without the need for a transmission port (reducing cost) and maintains an audio DSP output. It is the perfect partner for WyreStorm’s range of hybrid optical fiber HDMI cables.

Wyrestorm-Transmitter& Receiver-TX-H2X-ADZ (15)

 

Wyrestorm-Transmitter& Receiver-TX-H2X-HDMI (1)

18 GBPS BACKPLANE

The highest possible bandwidth that currently exists according to the HDMI 2.0 specification can be managed by the TX-H2X-ADZ and sent over distance. Newly emerging 60Hz HDR-10 & Dolby Vision content can also be handled by this powerful future-ready device.

AUDIO DSP

No two rooms or even installations are the same. That’s why we’ve coupled to each audio zone output; a powerful audio DSP, which allows an integrator to have complete control over the audio configuration. Also, a 10-band equalizer, volume and variable delay, which can be set per zone for a truly customized room-by-room balance.

Wyrestorm-Transmitter& Receiver-TX-H2X-ADZ (20)

GREAT VALUE OPTION

Omitting the complex HDBaseT transmission port, this card allows an input, output and audio functionality to still be added to an H2XC matrix. Whether adding just another audio zone or tapping into the 18Gbps backplane for further I/O, this card can still do it all.

Wyrestorm-Transmitter& Receiver-TX-H2X-ADZ (27)

HDCP2.2

The latest 4K UHD content arriving via satellite, cable, disc or stream is all heavily encrypted. Being part of the growing H2 product family, all H2XC matrix cards and peripheral devices support the multi-point distribution of this content over HDMI, HDBaseT and multi-mode fibre.

 

Prodcut Features

  • 18Gbps HDMI input to matrix backplane
  • Switched HDMI output capable of 2160p 4:4:4 and HDR @ 60Hz
  • Audio zone output: analog stereo pre-out with mirrored S/PDIF output
  • Separate S/PDIF input for additional audio source
  • Adds additional audio zone + DSP to an H2XC chassis
  • Supports 4K/60 4:4:4 or RGB content
  • Compatible with all HDR standards such as HDR-10, HLG and Dolby Vision™
  • Passes all audio formats including DTS:X and Dolby Atmos
  • Cost-effective pure HDMI card aligns perfectly with WyreStorm Active Optical HDMI cables

Specifications

AUDIO AND VIDEO
Inputs 1x HDMI In: 19-pin type A1x S/PDIF In: S/PDIF Coaxial Digital
Outputs 1x HDMI Out: 19-pin type A1x Audio Out: 3-pin Terminal Block – 3.5mm1x S/PDIF Out: S/PDIF Coaxial Digital
Output Video Encoding NA
Encoding Data Rate NA
End to End Latency NA
Audio Formats S/PDIF: 2ch PCM | Multichannel: Up to 5.1 DTS and Dolby DigitalHDMI: 2ch PCM | Multichannel: LPCM and Up to DTS-X and Dolby Atmos
Video Resolutions (Max) Video Resolutions

1920x1080p @60Hz 12bit

3840x2160p @24Hz 10bit 4:2:0 HDR

3840x2160p @30Hz 8bit 4:4:4

3840x2160p @60Hz 10bit 4:2:0 HDR

3840x2160p @60Hz 12bit 4:2:0 HDR

4096x2160p @60Hz 8bit 4:2:0

4096x2160p @60Hz 8bit 4:4:4

HDMI

15m/49ft

7m/23ft

7m/23ft

5m/16ft

3m/10ft

7m/23ft

3m/10ft

Note: WyreStorm recommends the use of shielded category cable to minimize signal noise and interference.

Supported Standards DCI | RGB | HDR | HDR10 | Dolby Vision up to 30Hz | HLG | BT.2020 | BT.2100
Maximum Pixel Clock HDMI: 600MHz
COMMUNICATION AND CONTROL
HDMI HDCP 2.2 | EDID | DVI-D supported with adapter (not included)
CEC CEC power triggering | Requires CEC compatibility
POWER
Power Supply Internal to Matrix
Max Power Consumption Matrix Dependent
ENVIRONMENTAL
Operating Temperature Matrix Dependent
StorageTemperature Matrix Dependent
Maximum BTU Matrix Dependent
REGULATORY
Safety and Emission Matrix Dependent

Home | Shop | Careers | Contact | Login
 
Copyright 2024 by Ultimate Integration