P125 Two-Channel, 125W, Dual Source Amplifier

The Russound P125 is a 2-channel dual source power amplifier with auto-source switching. It features
Primary and Secondary audio line inputs with a loop out to another zone, receiver, or device from
the secondary source. A speaker-level input can be connected and assigned as either the primary or
secondary source. This amplifier can be used for power upgrades in zones for large speaker selector
or volume control systems.

The P125 is rated at 125 watts per channel into 4 ohms, and 80 watts into 8 ohms. With the
Stereo/Bridge Mono switch in the Bridge Mono position, both amplifier channels are combined for a
higher powered mono output. In Bridge mode the X125 is rated at 250 watts of power into a single
8 ohm load. The 12V Trigger In/Out allows the amplifier to be activated by other devices or to
activate other electronics via a 3.5 mm mini phone plug cable, with 100mA current capability.

Not available to countries requiring CE certification. Modifications are necessary for use at 220v.

Features
Volume and balance allows for control at the component instead of volume control or keypad
A/B speaker switching easily toggles output between two sets of speakers or zones
Signal sensing inputs automatic turn on/off and switching to second source
Bridgeable - delivers higher output for use with a subwoofer or outdoor speakers

Specifications
Shipping Dimensions: 18.8" (W) x 5.3" (H) x 22.0" (D), (47.8 x 13.5 x 55.9 cm)
Shipping Weight: 31.4 lbs (14.2 kg)
Crosstalk: > 70dB @ 1 kHz, ref. to rated power @ 8 ohms
Frequency Response: 20Hz to 20kHz +0.0dB/- 0.5dB @ 8 ohms, 1W
Input Sensitivity: 500mV for 80W at 8 ohms
Power Output: 80W per channel at 8 ohms, 125W per channel at 4 ohms, 250W bridged
Power Requirement(s): 120VAC 60Hz 5.8A, 230VAC 50Hz 3A, IEC 320 type connector with 3 terminal detachable power cord.
Signal to Noise Ratio: 93dB A-weighted