Vanco Evolution 4K HDBaseT™ 2.0 Extender with ARC and Digital/Analog Audio Breakouts

The Evolution by Vanco EVEXHDARC HDBaseT 2.0 Extender with Bi-directional IR, PoC, ARC, and Digital/Analog audio breakouts, extends 4K/60Hz ultra high definition video and audio signals, IR, power, Ethernet, RS-232, and ARC at a distance of up to 330ft/100m over a single shielded Cat6 cable. Also features Long Range Mode (LRM), in which 1080p high definition video and audio signals can be extended up to 492ft/150m over a single Cat5e/6 cable.

Power over Cable (PoC) Technology transmits power over Cat5e/6, allowing either the Transmitter or Receiver to be powered without the use of a power supply. No EDID or EQ adjustments are necessary as the units automatically adjust for compatibility and gain. For the audiophile in mind, Audio Return Channel (ARC) is supported, with digital and analog audio breakouts. Also has the ability to expand networking setup, by extending Ethernet along with HDMI signals over the single Cat5e/6 cable, allowing for two RJ45 jacks on the receiving end, to hardwire any network capable components. In addition, RS-232 and bi-directional IR pass-through allows for source and/or display control. For extending HDMI signals over a single Cat6 with IR at a long distance, with Power over Cable, and maximum 4K and 1080p extension, the EVEXHDARC is a great plug and play solution for connecting the latest components!

The EVEXHDARC includes two units: transmitting unit (EVEXHDARC-TX) and receiving unit (EVEXHDARC-RX). The transmitting unit is used to capture the HDMI input with IR signals and carries the signals via one cost effective Cat5e/6 cable. The receiving unit is responsible for equalizing the transmitted HDMI signal and reconstructing IR signals. The EVEXHDARC offers the most convenient solution for 4K extension over a single Cat5e/6 with Power over Cable, and is the perfect solution for any application.

• Features HDBaseT™ 2.0 technology, optimized for whole-home or commercial distribution of uncompressed high-definition signals at more than twice the distance of HDMI cables without degradation
• Capable of sending and receiving resolutions of up to 4K2K@60Hz with YCbCr 4:2:0 up to 330ft/100m using Shielded Cat6 Cable or 230ft/70m using Unshielded Cat5e Cable
• Allows audio, video, power, control and Ethernet to be sent over a single Category cable up to 100m/328ft
• Supports PoC (Power Over Cable) function allowing either the TX or RX to power the opposite side when using the provided 24v power supply
• Supports Full HD: 1080p@60Hz@24/36/48bit/pixels
• Supports HDBaseT Long Reach (LR) mode to allow 1080p to be transmitted and received up to 492ft/150m
• ARC functionality allows audio to be received from the HDMI port on the receiver and sent out of the Digital audio output
• Supports external analog and digital audio transmission
• Supports pass-through of HD audio formats: LPCM2/5.1/7.1 CH, Dolby Digital, DTS, Dolby TrueHD, DTS-HD Master Audio and more.
• Bidirectional IR and RS232 pass through
• HDCP 2.2 and DVI 1.0 compatible
• Wideband 38KHz-56KHz IR
• Dimensions: 5” W x .7” H x 4.1” D
• UPC:  741835106269

Package Contents:

Extender Set
IR TX
IR RX
Phoenix Connector
24V/1A DC Power Supply
Product Manual