Wyrestorm CON-H2-EDID 4K60 In-line Signal Re-Clocker with EDID Management
A multi-purpose installer tool, the CON-H2-EDID can perform a variety of tasks within an install. As an in-line device, it can act as an EDID manager to request specific content from a source, or as an audio de-embedder, extracting HDMI source audio via the S/PDIF or stereo mini-jack ports. Additionally, it can be a micro zone controller, sending CEC and RS-232 power triggers to connected projectors or screens and from its two relay ports, and can trigger devices in the zone using signal presence logic.
- In-line EDID manager with assignable presets or copy & import capability
- Assignable relays triggered on signal presence or via RS-232
- Source sensing power triggering:
- CEC: Compatible screens or projectors triggered manually via API or automatically on signal presence
- Serial: Power on/off commands can be stored and sent via RS-232 port
- Setup & configuration via simple PC configuration tool (WyreStorm Management Suite v1.6 or higher)
- Relay momentary or latching control
- Powered by 12v DC power supply (US, UK, EU and AU PSU pins included)
- Mounting brackets included
- USB-3-pin phoenix cable required for setup (not included) – Use P/n CAB-USB-PX1
Inputs
1x HDMI In: 19-pin HDMI Type A
Outputs
1x HDMI Out: 19-pin type A
1x Audio Out: 3.5mm (1/8in) TRS Stereo
1x S/PDIF Out: S/PDIF Coaxial Digital
Audio Formats
HDMI Pass-through: 2ch PCM | Multichannel: LPCM and Up to DTS-X and Dolby Atmos
S/PDIF Out: De-Embed: 2ch PCM | Multichannel: Up to 5.1 DTS and Dolby Digital
Analog Out: 2ch
Video Resolution (Max)
1920x1080p @60Hz 12bit
3840x2160p @60Hz 12bit 4:2:2 HDR
4096x2160p @60Hz 8bit 4:4:4
Supported Standards
DCI | RGB | HDR | HDR10 | Dolby Vision | HLG | BT.2020 | BT.2100
Maximum Pixel Clock
600MHz
HDMI
HDMI 2.0 | HDCP 2.2 | EDID | CEC Triggering
Inputs supports DVI/D and DisplayPort Dual-Mode (DP++) v1.3 with adapter (not included)
CEC
CEC Power Triggering | Requires CEC compatibility
RS-232
1x RS-232: 3-pin Terminal Block – 3.5mm
Relays
1x Relay 2: 3-pin Terminal Block – 3.5mm | 1x Relay 1: 3-pin Terminal Block – 3.5mm | Max 1A load
Power Supply
12V DC 0.5A
Max Power Consumption
≤2W