Intellinet
Intellinet IPI-15
1 Port PoE Injector(15.4w/48vDC)
Low Stock, Call (855)326-8958
Retail: $27.99 EA


The INTELLINET NETWORK SOLUTIONS Power over Ethernet Injector allows you to connect your IEEE 802.3af-compliant products to a non-PoE LAN switch port. The injector can be used to connect a wireless access point, IP phone, network camera or any IEEE 802.3af powered device (PD) to a switch.

No need to run AC power lines for your wireless access point, network camera or IP phone. Simply connect the PoE Injector to the LAN switch port, and use the existing Cat5 cabling to deliver DC power as well as transfer data.


FEATURES

- Ideal when AC power is not available
- Distance support: up to 100 m (328 ft.)
- Power output of up to 15.4 Watts
- Supports all IEEE 802.3af-compliant PoE devices (Wireless LAN access points and bridges, VoIP (Voice over - Internet Protocol) telephones, IP surveillance cameras)
- Supports IEEE 802.3af detection and short circuit, overload and high-voltage protection
- Full-power Class 3 PoE design
- Fanless design ideal for silent operation
- Three-Year Warranty


SPECIFICATIONS

Standards
IEEE 802.3af (Power over Ethernet)
IEEE 802.3 (10Base-T Ethernet)
IEEE 802.3u (100Base-TX Fast Ethernet)

General
Media support:
- 100Base-TX Cat5 UTP/STP RJ-45, 8 pin
Ports:
- 1 RJ-45 100 Mbps input port
- 1 RJ-45 100 Mbps data and power output ports
- 1 power input connector (3 pin)
Protection functions:
- Short-circuit protection for short GND
- Overload protection for currents over 450 mA
- High-voltage protection for output voltage exceeding 52 V
Compatibility - general: all IEEE 802.3af-compliant PoE devices
Supported INTELLINET NETWORK SOLUTIONS products:
- Wireless 300N Access Points (524735, 524711)
- High Power Wireless G Access Point (503082)
- PoE Splitter (502900)
- Network Cameras (550932 NBCC30-IR, 550963 NFC30-IR, 550949 NFC30, 550987 NFD30, 551021 NFC31, 551045 NFC31-IR)
Certifications: FCC Class B, Part 15, CE 89/336/EEC

RJ-45 Input Connector Pinout
Pin 1: Rx+ (data receive)
Pin 2: Rx- (data receive)
Pin 3: Tx+ (data transmit)
Pin 4: NC (not connected)
Pin 5: NC (not connected)
Pin 6: Tx- (data transmit)
Pin 7: NC (not connected)
Pin 8: NC (not connected)

RJ-45 Output Connector Pinout (Data + Power)
Pin 1: Rx+ (data receive)
Pin 2: Rx- (data receive)
Pin 3: Tx+ (data transmit)
Pin 4: -Vdc_return (+) (feeding power [+])
Pin 5: -Vdc_return (+) (feeding power [+])
Pin 6: Tx- (data transmit)
Pin 7: -Vdc (feeding power [-])
Pin 8: -Vdc (feeding power [-])

LEDs
AC Powered (red)
Channel Powered (green)
Channel Alarm (red)

Power
Input: 100 – 240 V AC, 50 – 60 Hz
Output: 48 V DC / 350 mA
Power consumption: 19 Watts (maximum)

Environmental
Plastic housing (ABS)
Dimensions: 120 (L) x 50 (W) x 35 (H) mm (4.7 x 2.0 x 1.4 in.)
Weight: 0.14 kg (0.3 lbs.)
Operating temperature: 0 – 60°C (32 – 140°F)
Operating humidity: 10 – 90% RH, non-condensing
Storage temperature: -20 – 85°C (-4 – 185°F)


Home | Shop | Careers | Contact | Login
 
Copyright 2024 by Ultimate Integration