Ubiquiti USW-Pro-Max-24-PoE (400W) Pro Max 24 PoE
Mechanical
Dimensions: 442 x 325 x 44 mm (17.4 x 12.8 x 1.7")
Weight Without mounting brackets: 5.1 kg (11.3 lb)
With mounting brackets: 5.2 kg (11.5 lb)
Enclosure material: SGCC steel
Hardware
Management interface: Ethernet In-Band
Networking interface:
- (16) GbE RJ45 ports
- (8) 1/2.5 GbE RJ45 ports
- (2) 10G SFP+ ports
- PoE interface:
- (8) PoE/PoE+ (Pins 1, 2+; 3, 6-)
- (16) 60W PoE++ (Pair A 1, 2+; 3, 6-) (Pair B 4, 5+; 7, 8-)
Total non-blocking throughput: 56 Gbps
Switching capacity: 112 Gbps
Power method:
- (1) Universal input, 100—240V AC, 50/60 Hz
- (1) USP-RPS DC input
Power supply: AC/DC, internal, 450W
Supported voltage range: 100—240V AC
Max. power consumption: 50W (Excluding PoE output)
Total available PoE: 400W
Max. PoE wattage per port by PSE:
- PoE: 15.4W
- PoE+: 30W
- PoE++: 60W
Voltage range PoE mode:
LCM display: (1) 1.3" touchscreen
Button: Factory reset
Ambient operating temperature: -5 to 40° C (23 to 104° F)
Ambient operating humidity: 10 to 90% noncondensing
Certifications: CE, FCC, IC
Switching Features
Layer 2 features:
- IGMP snooping
- STP / RSTP with priorities and port-level disable
- Port isolation
- Storm control
- Voice VLAN
- Port mirroring
- LACP port aggregation
- Multicast / broadcast rate limiting
- MAC address blocking
- Flow control
- 802.1X control
- Jumbo frames
- Proprietary loop protection
- DHCP snooping / guarding
- Egress rate limit
- LLDP-MED
- Port restricted by MAC
- Device isolation with ACLs
Layer 3 features:
- DHCP for locally-managed networks
- DHCP relay
- Inter-VLAN routing between networks on same switch
- Static routing between local networks
- Network isolation with ACLs
Etherlighting™
Ethernet:
- Locating
- Speed/link
- Native VLAN/network
SFP+:
- Locating
- Speed/link
- Native VLAN/network
LEDs
System: Status
RPS: Status
Application Requirements:
UniFi Network Version 8.0.24 and later