Lutron Wallbox Power Module

Installs in a standard 4-gang U.S. wallbox, 3-1/2-inch (89 mm) deep is strongly recommended. Always allow at least 4-1/2 inch (114 mm) clearance above and below the module to provide adequate space for cooling. Wallplate snaps on with no visible means of attachment. The Wallbox Power Module controls up to six zones of light and will operate the following sources with a continuous Square Law dimming curve or on a full conduction non-dim basis:

• Incandescent

• LED1, 2

• Tungsten Halogen

• Electronic Low-Voltage (ELV)3

• Magnetic Low-Voltage (MLV) Transformer

• Metal Halide / High Pressure Sodium Switched

• Neon / Cold Cathode

• Lutron Tu-Wire Electronic Fluorescent Dimming Ballasts

• Approved LED and CFL lamps / fixtures